Real-time email statistics: discover, save, and improve

Jose Argudo , CMO @ Mailrelay

If you run email marketing campaigns, statistics can help you in more ways than meets the eye.

In fact, email statistics have become an absolute must to optimize your results.

Mailrelay offers you statistics for your email campaigns, even in real time, so you can make the best decisions about your email marketing.

And it’s much more than just knowing how many contacts open your emails and how many click; there is a lot more information available for you to use.

We’re going to break it down in this article so you can make the most of it.

Measure every campaign in real time

Create your free account and check the opens, clicks and click map of every campaign.

Email analytics and real-time statistics

When you send an email campaign, Mailrelay’s statistics engine will start collecting information about it.

You’ll immediately see how emails are delivered, how opens and clicks occur, and more.

All this information is accumulated in real time, while the sending is happening.

Of course, not all your contacts will open your emails at that exact moment; some will do it later, others even the next day, for example.

That information will also be added to the statistics as it’s collected.

So you’ll have access to two types of information about your campaigns:

  • Real-time information with the immediate data being gathered
  • And after a few hours, or a day, more complete and consolidated information, which will show a more accurate result of the campaign

Both types of information will allow you to make different decisions.

On the one hand, you’ll see immediate results of opens, clicks, most clicked links, and much more, giving you an instant picture of the campaign’s success.

For example, are the people opening it clicking where you wanted them to?

And, once the campaign finishes and consolidates, you’ll have global data.

What can you get out of this?

Let’s see.

Instantly discover what content and links work best

Instantly discover what content and links work best

What can you see with real-time email statistics?

A lot of information. For example, Mailrelay offers you the following statistics:

· Real-time open rate:

As soon as you launch your email campaign, the emails will start to be delivered.

And as the contacts on your list open them, the open rate will increase.

At first, it’s normal for the open rate to be a bit low, as emails are delivered very quickly, and your contacts might take a while to open them.

So this metric will gradually rise as time goes by.

The open rate can give you some clues:

  • For example, if the subject line you’ve written is effective, grabs attention, and encourages opens
  • And even if the response is immediate, or takes longer, if the sending times you’ve chosen are the best

If right after sending your campaign, your contacts open your emails, that could indicate it’s a good sending time.

With real-time statistics, you can check this and run tests at different times and days.

If you see a good immediate response, that’s a good sign; if not, try adjusting the schedule.

· Link clicks and click map:

Just like opens, campaign analytics will also show clicks.

How can these statistics help you?

On the one hand, you’ll know if, once the email is opened, contacts are clicking where you want them to.

If your call to action (CTA) doesn’t receive clicks fairly immediately after emails are opened, you might think:

  • The call to action isn’t striking enough
  • It isn’t in a visible enough spot
  • Or maybe the chosen contact segment isn’t the right one

If opens are good, and the contact segment you’ve chosen seems right, but clicks are still low, it might be interesting to resend changing the call to action.

In fact, Mailrelay allows you to create a contact segment that excludes those who have already clicked, so you could send a newsletter saying something like:

  • “I know you’ve already seen this, but let me tell you a bit more…”

And focus on other aspects of your product or service that you think might be of interest and weren’t fully appreciated in the other email.

· Click map (heatmap):

If you include several links, Mailrelay offers you a click map where you can compare which links have been most effective.

You can see this overlaid on the newsletter itself, like a heatmap, to know which areas of the email successfully captured attention.

It will help you improve your email design.

It’s not just about being able to prepare an email campaign quickly, but measuring its effectiveness.

· Top links:

Besides the heatmap, in the statistics, you’ll be able to see a list of URLs sorted by click volume.

This complements the heatmap, giving you another way to see which links in your email were the most effective.

In short, you’ll be able to see all this information in real time, but as hours go by, it will consolidate into more definitive statistics.

Save your sender domain reputation by detecting errors early

Save your sender domain reputation by detecting errors early

So far we’ve talked about opens, clicks, link statistics, and more.

However, there are other data points that are also very important:

  • Bounces
  • And spam complaints

Are they also useful in real-time statistics?

Definitely, and I’ll tell you why.

· Real-time bounces:

We recently published a very interesting article, this one, explaining how harmful bounces can be to your email campaigns.

In fact, a bounce rate above 2% can be penalized by destination servers.

We are referring to hard bounces, not soft bounces.

In the article I mentioned earlier, we saw that this can happen with contact lists that haven’t been emailed for a long time.

So, if you run a campaign, and in the real-time statistics you see the bounce rate growing heavily (and 2% is already considered high), pause it; it’s better to do that than end up with your sender domain blocked by destination servers.

This information is key.

And since it’s delivery-related information, you’ll have it immediately available in real time.

This way you can ensure there are no issues with your contact list without penalizing your sender domain.

· Spam complaints:

Just like with bounces, if right after launching your campaign you start seeing spam complaints, it might be best to pause the campaign.

Spam complaints should stay below 0.03%

If the volume exceeds those numbers, the risk of your domain ending up on blacklists is high.

Make sure to send your campaigns to contacts who want to receive them and always include an unsubscribe link in all your campaigns.

These two metrics, spam complaints and bounces, can indicate serious problems for your mass email campaigns, so if you detect issues—and with real-time statistics you can—the best thing to do is pause the campaigns and analyze what might be happening.

Improve your email campaigns with real-time data

Improve your email campaigns with real-time data

Real-time statistics allow you to draw conclusions as soon as the sending starts.

It’s clear that if you wait a few hours, the data will be richer and more complete, there’s no doubt about that.

However, having certain information immediately can be very useful, as we’ve seen in the previous points.

· Optimize content and design:

When you send a campaign, you want it to have an immediate impact, for them to open it as soon as they receive it.

And after opening it, for them to click on the links

If your design isn’t achieving that, optimize your email design (suggestions here).

Observe, for example:

  • If they opened the email but didn’t click
  • If they clicked on some links and not others

For instance, if clicks were on the top links but not the ones further down in the newsletter, it could indicate that contacts didn’t read the whole email, that they didn’t scroll to the bottom.

· Smarter segmentation:

Mailrelay has one of the most complete contact segmentation tools.

So if you think a campaign should have had better results than obtained, you can use segmentation to, for example, create one or more segments:

  • Contacts who received the email and didn’t open it: try sending another subject line or at a different time
  • Those who opened it but didn’t click: try a different design/content

Real-time statistics allow you to know the most immediate impact it generates on your contacts.

Can they help you in any other way?

Faster and more effective A/B tests thanks to real-time analytics

Faster and more effective A/B tests thanks to real-time analytics

Mailrelay also has an A/B testing tool that you can use to test:

  • Different subject lines
  • Different senders

Does the email subject line matter that much?

Yes, more than it might seem at first glance.

I’ll give you an example with three different subject lines, A, B, and C.

All three sent to the same number of random contacts from the same database.

A/B test example in Mailrelay

In this case, subject line B yielded a click result 175% higher than the other two subject lines.

Is it worth doing these A/B tests or not?

· How do A/B tests work?

It’s actually very simple:

  • You choose the base newsletter you want to test with
  • The group or segment you want to send it to
  • Whether you want to test different senders or different subject lines
  • What percentage of the total list you want to test with (for example, 20%)
  • And how the winner will be decided (manually, the one with the most opens, the one with the most clicks)
  • If deciding automatically, how long you want to wait

And that’s it.

This is the simplest way to optimize your campaign results effortlessly.

To play it safe.

You can try it out in the newsletters section of your account; running a few A/B tests will help you.

So, what real-time metrics does Mailrelay offer?

So, what real-time metrics does Mailrelay offer?

Although we’ve been discussing them throughout the article, I think it’s worth summarizing everything here.

· Emails sent and delivered:

You’ll see this immediately, as the emails on your list are sent and delivered little by little.

The delivered figure excludes both hard and soft bounces.

· Opens and open rate:

Mailrelay shows in real time how many contacts opened the email at least once, as well as the percentage they represent of the total delivered (the open rate).

Open and click tracking is included in the free account and in the Enterprise plan. The Standard plan doesn’t include it, although it does include delivery, bounce and unsubscribe statistics.

You can also find out who those contacts were that opened your newsletter, as there’s a list containing all of them.

· Clicks and click-through rate (CTR):

You can view total clicks, unique clicks, the click map, and more.

This information, along with opens, will guide you to accurately understand the success of your email campaign.

· Click map:

We’ve already mentioned it, but this is a truly useful tool.

You can know exactly which links had the most clicks, and this answers many questions about your email design:

  • If the links and calls to action are visible enough
  • How far down they read your email
  • How much interest that content sparked

It’s a very good measure of the impact your campaign generates on contacts.

· Top clicked URLs:

You can also see a list of clicked URLs, sorted by click volume.

Although the click map is highly interesting, in this other report you’ll see which URLs were the most successful.

You can compare both screens to see whether the most clicked links are the ones placed higher up, or whether there’s no such pattern and people clicked the ones that sparked more interest, the ones in buttons, etc.

· Unsubscribes and reasons:

Mailrelay will inform you of the unsubscribe volume for each campaign you send.

This data also appears in real time, so if you see a lot of unsubscribes right after launching your send, it might be best to pause it and look into what’s going on.

On top of that, and for greater certainty, Mailrelay allows contacts to indicate their reason for unsubscribing during the process.

And that data is available to you in the statistics, so you know the reasons behind the unsubscribes.

If they say they didn’t subscribe or that they think it’s spam, be careful.

· Spam complaints:

A highly important metric that is usually quite underestimated.

First of all, as we mentioned earlier, different ISPs (Gmail, Outlook, Yahoo!, etc.) expect spam complaints to stay below 0.03%.

Out of 20,000 emails sent, that would be 6 complaints.

What’s the problem with this?

That often ISPs don’t report all spam complaints.

So if you see you have a complaint, the reality is likely that there are more.

The goal is to have 0.

Always send your mass campaigns to contacts who want to receive them, and make the unsubscribe process as easy as possible.

· Soft and hard bounces:

You’ll also find this key information in the statistics.

And you won’t just see it, but you’ll be able to download a CSV by specific type (soft bounces, hard bounces, etc.).

Since hard bounces are permanent, they will automatically be flagged so you don’t send to them again, keeping your list clean.

Without you having to do anything manually.

· Geographic statistics:

Another feature Mailrelay offers is the geographic location of opens and clicks.

In the statistics, you’ll have the following information:

  • City
  • State/Province
  • Country
  • Browser
  • Operating system

You can then use this data in Mailrelay’s segmentation tool to segment contacts based on this information.

· Best times of day (heatmaps):

Your account’s main dashboard has two heatmaps: “Heatmap impressions” and “Heatmap clicks”. They show, by day of the week and by hour, when your subscribers open your emails and when they click. The more intense the color, the more activity there is in that time slot.

You can choose the period they cover (for example, the last 7 days) and use what you see to decide the day and time to schedule your next campaigns. If opens peak mid-morning but clicks come in the afternoon, pick the time slot that best fits the goal of the campaign.

· Google Analytics and UTM parameters:

If you want to know what happens on your website after the click, turn on Google Analytics tracking in the campaign. You set the campaign name (utm_campaign) and Mailrelay fills in utm_source and utm_medium with standard values by default, so you don’t have to tag every link by hand.

This way you’ll see in Google Analytics the visits, conversions and sales each campaign generates, and you can compare them with those from other channels. To learn more about these parameters, see what UTM parameters are.

· Individual contact tracking:

Besides general analytics, you can drill down into a specific contact to see which emails they have received, which ones they have opened, etc.

With all this information, you’ll be able to pinpoint the success of your campaigns, if there’s any problem to solve, or where and what to improve.

Mailrelay vs. the competition: the advantage in email marketing analytics

Which email analytics tools offer real-time metrics?

Most email marketing tools show each campaign’s statistics almost in real time. What changes is which metrics you get on each plan, especially opens and clicks, and how detailed the reports are. Mailrelay gives you real-time statistics for every campaign, with a click map, top links, geographic data and per-contact data. Opens and clicks are included in the free account, with up to 80,000 emails a month and 20,000 contacts, and in the Enterprise plan, but not in the Standard plan.

Email analytics in the main tools (November 2026)

ToolOpens and clicksMore complete reportsFree plan
MailrelayIn the free account and in Enterprise; the Standard plan doesn’t include themClick map, top links, geographic and per-contact data, in real time80,000 emails a month and 20,000 contacts
MailchimpYes, with basic analytics on the free planMore detailed analytics from the Standard plan250 contacts and 500 sends a month
BrevoAccording to its pricing page, from the Starter planClick heatmap and reports by country and device, from the Standard plan300 emails a day
MailjetYesClick map, per-contact history and campaign comparison (its website doesn’t say on which plans)6,000 emails a month, with a maximum of 200 a day
HubSpotYesClick map and per-contact data; some reports from Marketing Hub StarterYes, with limited features
ActiveCampaignYesGoogle Analytics integrationNone; 14-day trial

Plans change often: check them on each tool’s website before choosing. And if you need the definition of each metric, you’ll find it in our glossary of email marketing metrics.

Try Mailrelay’s statistics

Create your free account and see in real time how each campaign performs.

There are many email marketing tools, which is why in this last section of the article we want to highlight the aspects of Mailrelay that can be most beneficial to you.

· The largest free account on the market:

Unmatched, and continually growing.

If you compare Mailrelay’s free account, which allows you to send up to 80,000 emails to up to 20,000 contacts, with any competing tool, you’ll see there’s no comparison.

For example, Mailchimp’s free plan only allows 250 contacts and 500 sends a month (with branding added to the emails), and most advanced features are limited.

Brevo’s free version caps you at 300 emails a day (about 9,000 a month).

Acumbamail only offers 2,000 monthly emails in its free tier, with a limit of 250 subscribers.

It’s clear that these free accounts are just so you can try out the tool.

Meanwhile, Mailrelay’s is fully functional for sending your email campaigns effectively.

And profitable for your business.

· Dedicated technical support (even on free plans):

Yes. Mailrelay offers human support via ticket even on the free plan; chat is added on Standard and phone support on Enterprise.

In other email marketing tools, the reality is that support is usually reserved for paid accounts.

A great support team won’t just help you get the most out of the tool; whenever you have a question or doubt, you’ll have real people ready to help you.

· Automations and A/B tests included and easy to use:

For a comparison of the different automation options included in email marketing tools, I suggest reading this article.

It’s much more detailed and comprehensive than what we can summarize here.

But in short, Mailrelay includes automation features in the free account, while other tools don’t.

· Real-time reports:

I won’t repeat myself on this here.

Mailrelay’s free account includes all the statistics we’ve seen in this article.

· Simple integrations and imports:

Mailrelay is one of the integrations available on Make.com.

What does this mean?

That you can sync Mailrelay with the more than 3,000 applications supported by Make.

If this isn’t enough, you also have:

  • A development API (here)
  • And an SMTP server

· Deliverability:

The most important thing about your email campaigns is that they reach their destination, right?

Mailrelay has its own infrastructure, with dedicated IPs that we manage ourselves to maximize effectiveness.

Additionally, it allows you to set up SPF, DKIM, and DMARC to ensure your campaign deliverability is as high as possible.

These setups are requirements requested by Gmail, Outlook, Yahoo!, and others.

Which makes them essential for your email campaigns.

Use statistics

Everything we’ve seen makes no sense if you don’t use it.

Remember that statistics are a tool that will allow you to optimize your campaigns, improve them, and get the maximum results.

And they are included in Mailrelay’s free account.

It’s impossible to ask for more.

So, make use of the tools at your disposal.

Frequently asked questions about Mailrelay’s statistics

Does Mailrelay show which country or city emails are opened from?

Yes. Each campaign’s statistics show the city, state/province and country where emails are opened and clicked, as well as the browser and operating system. You can use that data to segment your contacts. Keep in mind that the location comes from the subscriber’s connection, so some opens may show up in a different city (we explain this in how email tracking works).

How do I know the best time to send my campaigns with Mailrelay?

Check the “Heatmap impressions” and “Heatmap clicks” heatmaps on your account’s main dashboard: they show on which days and at what times your subscribers open and click. Then schedule the campaign for that time slot with scheduled sending, and compare several campaigns before settling on a time. You’ll find more ideas in what is the best time of day to send newsletters.

Does Mailrelay integrate with Google Analytics?

Yes. When you turn on Google Analytics in a campaign, you choose the utm_campaign value and Mailrelay fills in utm_source and utm_medium with standard values in the email’s links. That way you see in Google Analytics the visits and conversions each campaign generates.

Which Mailrelay plans include open and click tracking?

The free account and the Enterprise plan. The Standard plan doesn’t include it, although it does show delivery, bounce and unsubscribe statistics. You can see each plan’s terms on the pricing page.

Jose Argudo, CMO at Mailrelay

Jose Argudo

CMO at Mailrelay. Writes about email marketing, copywriting and conversion for small businesses and entrepreneurs.

More articles by Jose · LinkedIn